*DATA HELP Form Actions ------------------- or or Move to next item on form or Move to previous item on form Move to first item on form Move to last item on form Move to next item located physically below current one Move to next item located physically above current one Quit the current process (Abort) Exit the current process (Save) Multiple Form Actions --------------------- Goes to previous form in a list of form pages Goes to next form in a list of form pages Field Actions -------------------- Invokes help Process choice list, if any, for current field Delete character at current cursor position Delete character left of cursor Move cursor to beginning of field Move cursor one position to the right Move cursor one position to the left Moves cursor to end of field Clear field Clear field and redisplay original value Clear from cursor to end of field Toggle between insert and overstrike mode Toggle strings for boolean toggle fields ( IF ENABLED for field ) *SCROLL HELP System Help for the Scrollable subform The following keys are recognized: while in Help: Zoom Help Window Help Choice list (if enabled for current field) Undo Clear field Clear end Beginning of field End of field Exit First field Prev. line Prev. field Cursor left Cursor right Last field Next line Next field Exit scroll region up Exit scroll region down Page a scroll region up Page a scroll region down Next field Prev. field Next field Abort form Delete char. Destructive backspace Insert mode Next field , , Previous field , Up field Down field First field Last field Begin of field End of field Cursor left Cursor right Exit Abort Exit scroll region up Exit scroll region down Page scroll region up Page scroll region down *MENU HELP Menu Help The following keys are recognized: Help Clear end Beginning of field End of field Exit while in Help: Zoom Help Window First field Prev. field Prev. field Cursor left Cursor right Last field Next field Next field Next field Prev. field Next field Abort Delete char. Destructive backspace Insert mode *MAIN_MENU_CONFIG Configuration Menu Help This menu provides for changing the parameters in the following areas: Analysis / Output options Pin Meter parameters Calibration File parameters System Defaults You may also veiw System Status *MAIN_MENU_DIGITIZE **************************************************************** *** Currently this program does not allow for *** *** scanning of images from within. *** **************************************************************** *MAIN_MENU_SELECT Select Image Menu Help or to move between fields save and exit form and also move between fields Pin Meter Sampling Information Date Date of data collection Operator Pin Meter Operator Site Location Location of Pin Meter Comments Researcher Comments i.e. the Pin Meter was parrallel to rows the Pin Meter was perpendicular to rows *MAIN_MENU_ANALYZE Image Analysis Help This option allows for analyzing the scanned image. +--------------------------------------------------------+ | *** elaborate further about analysis options *** | +--------------------------------------------------------+ *MAIN_MENU_DISPLAY Display Report Help Menu This routine will display the report that was generated from the data collected on the current image. *MAIN_MENU_PRINT Print Report Help Menu This routine will print to the current line printer the report that was generated from the data collected on the current image. *MAIN_MENU_FILE File Report Help Menu This routine will take the data collected from the image and save it to the disk drive in report form. *MAIN_MENU_EXIT EXIT Option Help This selection will EXIT you from the program. Operation will cease and you will be returned to DOS. *CFG_MENU_ANAL_OPTS Configuration Analysis / Options Help Calibrate Image File Data Output Header Information Output Units Output Type Output Coordinates Line There are four types of data points that can be output in a report. They are: (z) (x,z) (#,z) (*,x,z) Where X = x distance from the reference line. Z = distance from reference line. # = pin number from left to right *CFG_MENU_METER_PARMS Pin Meter Parameters Help Pin Meter Parameters: Reference Mark Spacing Pin Meter Pin Spacing Number of Pin Meter Pins Pin Meter Background Color Pin Meter / Scanner resolution parameters: Minimum thickness of pins Minimum length of pins Average thickness of pins Maximum roughness of pin meter pin edges Pin Meter Calibration Files: File Path File Extensions File Name *CFG_MENU_CREATE_CAL Calibration File Creation Help Number of Pin Meter Pins Number of Calibration Image Files Calibration File Header New Calibration File File Path File Extension File Name *CFG_MENU_SYS_DEFAULTS System Defaults Help Menu This routine lets you view and change system defaults. File path and extension defaults: Input Image Files User Output Data Files System Data Files Color defaults: Pin Mark Color Reference Mark Color AOI Region Color Text Color ABS Coordinates color REL Coordinates color Video Adapter Selection *CFG_MENU_STATUS System Status Help The System Status routine displays information about the following: EMS Driver EMS Version EMS Memory DOS Version DOS Memory Video Adapter *CONFIG_OUTPUT_TYPE There are four types of data points that can be output in a report. They are: (z) (x,z) (#,z) (*,x,z) Where X = x distance from the reference line. Z = distance from reference line. # = pin number from left to right *CONFIG_COORD Coordinates Options: Image Boundary = Distance from edge of image on right Referenence Line = Distance from the line between the two reference marks. Regressed Line = Distance from the best fit straight line. Normalized = Distance from the line that is parallel to Reference Line the reference line but has 50% of the pins above and 50% of the pins below. *SLCT_MENU_FILE Select Image File Select one of the listed files for image analysis. If the file you want to select is in a different directory. Change the drive and path options then select the file. i.e. if your image is on a floppy in the A drive, in the root (\) directory select the following: FILE PATH: A:\ *SLCT_MENU_COMMENT Comment Field Help Exits and Saves information move to previous and next windows moves to previous window moves to next windwo You should enter other critical data in this section. i.e. orientation of the pin meter. The pin meter was oriented parallel to the rows. The pin meter was oriented perpendicular to the rows. *END this is the end of the help file.