Cultivator, row 3 in ridge O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 0.89405453 omaxspeed 2.4586499 op_notes3 Row crop cultivator w/ sweeps leaving a 3" ridge 05-14-02 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 5.799433 ostir 17.55 G 01 gtdepth 76.20015 gtilint 0.5 gtilArea .9 gtstddepth 76.20015 gtmindepth 50.800102 gtmaxdepth 101.600204 P 01 P 02 rroughflag 1 rrough 15.240031 P 05 rdgflag 1 rdghit 76.20015 rdgspac 762.0015 rdgwidth 0.0 dkhit 0.0 dkspac 0.0 P 11 asdf 3.0 crif 1.0 P 12 soilos 0.75 P 13 laymix 0.35 P 34 frselpool 4 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 14 massflatvt1 0.7 massflatvt2 0.3 massflatvt3 0.3 massflatvt4 0.1 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.68 massburyvt2 0.6 massburyvt3 0.52 massburyvt4 0.39 massburyvt5 0.77 P 26 massresurvt1 0.04 massresurvt2 0.04 massresurvt3 0.04 massresurvt4 0.06 massresurvt5 0.04