Fert applic. deep plcmt hvy shnk O 03 ospeed 2.2351363 odirect 0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 6/7/01 DTL Corrected 8/7/07 MAS G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 8.418531 ostir 13 G 01 gtdepth 203.20041 gtilint .8 gtilArea .5 gtstddepth 203.20041 gtmindepth 127.00025 gtmaxdepth 254.0005 P 01 P 02 rroughflag 1 rrough 38.100075 P 05 rdgflag 1 rdghit 76.20015 rdgspac 304.800612 rdgwidth 101.600204 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif -2.0 P 12 soilos 0.85 P 13 laymix 0.5 P 31 kilflag 2 P 40 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.7 massflatvt2 .55 massflatvt3 .5 massflatvt4 0.1 massflatvt5 1.0 P 25 burydist 4 massburyvt1 .25 massburyvt2 .2 massburyvt3 .15 massburyvt4 .13 massburyvt5 .19 P 26 massresurvt1 0.05 massresurvt2 .05 massresurvt3 0.05 massresurvt4 0.1 massresurvt5 0.05