Fert. applic., strip-till 30 in O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 6/7/01 DTL Edited for WEPS to match. MAS 1-16-07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 8.418531 ostir 5.36 G 01 gtdepth 127.00025 gtilint 0.6 gtilArea 0.33 gtstddepth 127.00025 gtmindepth 101.600204 gtmaxdepth 254.0005 P 01 P 02 rroughflag 1 rrough 15.240031 P 05 rdgflag 1 rdghit 101.600204 rdgspac 762.0015 rdgwidth 381.00076 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif 2.0 P 12 soilos 0.85 P 13 laymix 0.15 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 14 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.3 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.165 massburyvt2 0.132 massburyvt3 .099 massburyvt4 0.0858 massburyvt5 0.1254 P 26 massresurvt1 0.04 massresurvt2 0.04 massresurvt3 0.04 massresurvt4 0.06 massresurvt5 0.04