Planter, into growing cover O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 This is a standard planter on 30 in sp with a 1 in ridge. Created in RUSLE 6/7/01. Except there is no crop called in. It is to be used to show the tillage effect when planting a crop such as sugarbeets into a live cover. To be use with Spray out, start growth which call in the main crop already growing and kills the cover crop. MAS 10-23-07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 4.1157265 ostir 2.44 G 01 gtdepth 63.500126 gtilint 0.5 gtilArea .15 gtstddepth 63.500126 gtmindepth 50.800102 gtmaxdepth 101.600204 P 01 P 02 rroughflag 1 rrough 10.160021 P 05 rdgflag 0 rdghit 50.800102 rdgspac 762.0015 rdgwidth 635.0013 dkhit 0.0 dkspac 0.0 P 11 asdf 2.8 crif 0.75 P 12 soilos 0.6 P 13 laymix 0.35 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 .3 massflatvt2 .25 massflatvt3 .2 massflatvt4 0.1 massflatvt5 1.0 P 25 burydist 1 massburyvt1 .0525 massburyvt2 0.0375 massburyvt3 .03 massburyvt4 .015 massburyvt5 .03 P 26 massresurvt1 .01 massresurvt2 .01 massresurvt3 .01 massresurvt4 .02 massresurvt5 .01