Subsoiler, wide spacing O 03 ospeed 2.0116227 odirect 0.0 ostdspeed 2.0116227 ominspeed 1.5645955 omaxspeed 2.6821637 op_notes3 Subsoiler with a straight point on a 48 spacing at 10 to 12 inch depth. Used in the Palouse to increase infiltration in the early part of the fallow year. 061604DTL" G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/8/07 MAS oenergyarea 19.64324 ostir 8.78 G 01 gtdepth 279.40054 gtilint 0.1 gtilArea 0.25 gtstddepth 304.8006 gtmindepth 254.0005 gtmaxdepth 381.00076 P 01 P 02 rroughflag 1 rrough 30.480062 P 05 rdgflag 1 rdghit 50.800102 rdgspac 1219.2024 rdgwidth 304.8006 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif -2.0 P 12 soilos 0.8 P 13 laymix 0.25 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.40 massflatvt4 0.3 massflatvt5 1.0 P 25 burydist 4 massburyvt1 .2 massburyvt2 0.15 massburyvt3 0.10 massburyvt4 .080 massburyvt5 .14 P 26 massresurvt1 0.01 massresurvt2 0.01 massresurvt3 0.01 massresurvt4 0.1 massresurvt5 0.01