Aerator, field surface, ground driven 10 degree offset O 03 ospeed 2.6821637 odirect 0.0 ostdspeed 2.6821637 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 AerWay tool . 10 degree gang angle setting. Ground driven 8" knife-tines mounted on a rotating shaft pulled across the soil, punch holes and shatter soil sideways as the blades rotate out of the soil. Little inversion or residue burial. 10/11/01 DTL From Rusle. MAS 3/14/06 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 5.1446586 ostir 23.4 G 01 gtdepth 152.4003 gtilint .5 gtilArea 1 gtstddepth 152.4003 gtmindepth 76.20015 gtmaxdepth 203.20041 P 01 P 02 rroughflag 1 rrough 15.240031 P 05 rdgflag 1 rdghit 0.0 rdgspac 0.0 rdgwidth 0.0 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif 2 P 12 soilos .85 P 13 laymix 0.25 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 .85 massflatvt2 .70 massflatvt3 .6 massflatvt4 0.5 massflatvt5 1.0 P 25 burydist 2 massburyvt1 .35 massburyvt2 0.30 massburyvt3 0.25 massburyvt4 0.15 massburyvt5 .25 P 26 massresurvt1 0.01 massresurvt2 0.01 massresurvt3 0.01 massresurvt4 0.01 massresurvt5 0.01