Cultivator, row - 1st pass ridge till O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 1.7881091 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 8/4/06 MAS from RUSLE G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/8/07 MAS oenergyarea 5.799433 ostir 17.55 G 01 gtdepth 63.50013 gtilint .75 gtilArea 0.85 gtstddepth 63.500134 gtmindepth 50.800102 gtmaxdepth 101.600204 P 01 P 02 rroughflag 1 rrough 17.780035 P 05 rdgflag 1 rdghit 101.600204 rdgspac 762.0015 rdgwidth 152.4003 dkhit 0.0 dkspac 0.0 P 11 asdf 3.0 crif 1.0 P 12 soilos 0.75 P 13 laymix .6 P 34 frselpool 4 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 14 massflatvt1 0.8 massflatvt2 .7 massflatvt3 .7 massflatvt4 0.1 massflatvt5 1.0 P 25 burydist 1 massburyvt1 .43 massburyvt2 .34 massburyvt3 .26 massburyvt4 .22 massburyvt5 .32 P 26 massresurvt1 0.04 massresurvt2 0.045 massresurvt3 .05 massresurvt4 .22 massresurvt5 0.04