Roller, on beds O 03 ospeed 1.7881091 odirect 0.0 ostdspeed 2.6821637 ominspeed 1.3410819 omaxspeed 3.5762181 op_notes3 Smooth roller on top of beds after planting as in sugarcane production. Only the top of the beds is compacted 02-01-02 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/8/07 MAS Created 11-30-07 MAS oenergyarea 2.338481 ostir .39 G 01 gtdepth 25.400051 gtilint .5 gtilArea 0.4 gtstddepth 25.400051 gtmindepth 25.400051 gtmaxdepth 25.400051 P 01 P 02 rroughflag 1 rrough 7.6200156 P 05 rdgflag 1 rdghit 203.20041 rdgspac 762.0015 rdgwidth 0.0 dkhit 0.0 dkspac 0.0 P 11 asdf 3.0 crif -0.22 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 .95 massflatvt2 .95 massflatvt3 .95 massflatvt4 .95 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.05 massburyvt2 0.05 massburyvt3 0.05 massburyvt4 0.05 massburyvt5 0.05 P 26 massresurvt1 0.01 massresurvt2 0.01 massresurvt3 0.01 massresurvt4 0.01 massresurvt5 0.01