Fert applic. surface broadcast O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Broadcast fertilizer spreader. Wheel traffic only. 11/17/01 DTL Added processes to match RUSLE and some that Fred Fox and I discussed were needed. MAS 8/8/07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 1.4966278 ostir .06 G 01 gtdepth 25.400051 gtilint 0.01 gtilArea .05 gtstddepth 25.400051 gtmindepth 25.400051 gtmaxdepth 25.400051 P 01 P 02 rroughflag 1 rrough 8.8900175 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.25 massflatvt2 0.2 massflatvt3 0.25 massflatvt4 0.1 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.003 massburyvt2 0.003 massburyvt3 0.003 massburyvt4 0.003 massburyvt5 0.003 P 26 massresurvt1 0 massresurvt2 0 massresurvt3 0 massresurvt4 0 massresurvt5 0