Slip plow 48 to 60 in. deep O 03 ospeed 2.0116227 odirect 0.0 ostdspeed 2.0116227 ominspeed 1.3410819 omaxspeed 2.2351363 op_notes3 Slip plow 48 to 60 inch operating depth 121604 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/8/07 MAS This is a deep subsoil devise with a wing on it pulled in CA orchards to improve drainage. Created 11-30-07 oenergyarea 23.384811 ostir 21.06 G 01 gtdepth 1270.0026 gtilint 0.5 gtilArea 1.0 gtstddepth 1270.0026 gtmindepth 1219.2024 gtmaxdepth 1524.003 P 01 P 02 rroughflag 1 rrough 7.6200156 P 05 rdgflag 1 rdghit 101.600204 rdgspac 6096.012 rdgwidth 3048.006 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif -2.0 P 12 soilos 0.8 P 13 laymix 0.3 P 40 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.6 massflatvt2 0.5 massflatvt3 0.45 massflatvt4 0.15 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.25 massburyvt2 0.2 massburyvt3 0.15 massburyvt4 0.32 massburyvt5 0.25 P 26 massresurvt1 0.03 massresurvt2 0.04 massresurvt3 4 massresurvt4 0.1 massresurvt5 0.03