Coulter caddy, fluted coulters O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Cloned from RIUSLE; Coulter Caddy fluted coulters on 7 to 10 inch spacing. 040405 DTL, MAS 10-17-06 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 3.2738733 ostir 8.58 G 01 gtdepth 50.800102 gtilint 0.4 gtilArea .55 gtstddepth 50.800102 gtmindepth 50.800102 gtmaxdepth 63.500126 P 01 P 02 rroughflag 1 rrough 7.6200156 P 05 rdgflag 1 rdghit 50.800102 rdgspac 203.20041 rdgwidth 76.20015 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif 2.0 P 12 soilos 0.4 P 13 laymix 0.25 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.65 massflatvt2 0.5 massflatvt3 0.45 massflatvt4 0.15 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.1925 massburyvt2 .1375 massburyvt3 0.11 massburyvt4 0.055 massburyvt5 0.11 P 26 massresurvt1 0.01 massresurvt2 0.01 massresurvt3 0.01 massresurvt4 0.02 massresurvt5 0.01