Cultivator, row, high residue O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 0.89405453 omaxspeed 2.6821637 op_notes3 High residue cultivator w/ single 24" sweep per row. 12-18-01 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS Cloned from row cultivator. 11-22-07 MAS oenergyarea 4.0221877 ostir 8.13 G 01 gtdepth 63.500126 gtilint 0.5 gtilArea .5 gtstddepth 63.500126 gtmindepth 50.800102 gtmaxdepth 101.600204 P 01 P 02 rroughflag 1 rrough 15.240031 P 05 rdgflag 1 rdghit 25.400051 rdgspac 762.0015 rdgwidth 711.2014 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif -2 P 12 soilos 0.75 P 13 laymix 0.3 P 34 frselpool 4 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 14 massflatvt1 0.7 massflatvt2 0.3 massflatvt3 0.3 massflatvt4 0.1 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.25 massburyvt2 0.2 massburyvt3 0.15 massburyvt4 0.13 massburyvt5 0.19 P 26 massresurvt1 0.04 massresurvt2 0.04 massresurvt3 0.04 massresurvt4 0.06 massresurvt5 .04