Furrow shaper, torpedo O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Furrow shaping operation on existing beds. Torpedo shaped device used to shape the furrows for furrow irrigation. 11/17/01 DTL Cloned from the Furrow Diker. 8-31-07 MAS G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS oenergyarea 3.2738733 ostir 2.19 G 01 gtdepth 76.20015 gtilint 1.0 gtilArea 0.6 gtstddepth 76.20015 gtmindepth 50.800102 gtmaxdepth 101.600204 P 01 P 02 rroughflag 1 rrough 6.096012 P 11 asdf 3.0 crif -0.22 P 12 soilos 0.75 P 13 laymix 0.05 P 05 rdgflag 1 rdghit 203.20041 rdgspac 760.0 rdgwidth 381.00076 dkhit 0.0 dkspac 0.0 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.3 massflatvt5 1.00 P 25 burydist 1 massburyvt1 0.3 massburyvt2 0.24 massburyvt3 0.18 massburyvt4 0.16 massburyvt5 0.13 P 26 massresurvt1 0.01 massresurvt2 0.01 massresurvt3 0.01 massresurvt4 0.02 massresurvt5 0.04