Fert. applic. anhyd knife 30 inch spacing, bedded O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Fertilizer application, anhydrous shank type, 30 inch spacing, general use preplant mark rows in preformed beds or post emerge sidedress in bedded systems. oenergyarea 7.4831395 ostir 2.6 op_devnotes3 This is a new operation, cloned from the 30in anhydrous fertilizer applicator. A bedded condition was added to show a 10 in x 30 in bedded condition MAS 4-5-2010 Cloned note: Used to mark rows or apply fertilizer for strip till systems. 12-07-01 DTL Edited for WEPS 1-16-07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS LMOD and WEPS update correlation; existing WEPS operation record 160410 jkp G 01 gtdepth 101.600204 gtilint 0.6 gtilArea 0.2 gtstddepth 101.600204 gtmindepth 76.20015 gtmaxdepth 152.4003 P 01 P 02 rroughflag 1 rrough 15.240031 P 05 rdgflag 1 rdghit 254.0005 rdgspac 762.0015 rdgwidth 609.6012 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif 2.0 P 12 soilos 0.85 P 13 laymix 0.15 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 14 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.3 massflatvt5 1.0 P 25 burydist 1 massburyvt1 0.1 massburyvt2 0.08 massburyvt3 0.06 massburyvt4 0.052 massburyvt5 0.076 P 26 massresurvt1 0.05 massresurvt2 0.05 massresurvt3 0.05 massresurvt4 0.07 massresurvt5 0.05