Fert applic. deep plcmt hvy shnk O 003 oenergyarea 8.418531 ostir 13 ofuel ospeed 2.2351363 odirect 0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Fertilizer application, heavy shanks, deeper placement and more disturbance than regular anhydrous type shanks. General use preplant application in low residue conditions. op_devnotes3 6/7/01 DTL Corrected 8/7/07 MAS G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS LMOD and WEPS update correlation; existing WEPS operation record 160410 jkp G 001 gtdepth 203.20041 gtilint .8 gtilArea .5 gtstddepth 203.20041 gtmindepth 127.00025 gtmaxdepth 254.0005 P 001 P 002 rroughflag 1 rrough 38.100075 P 005 rdgflag 1 rdghit 76.20015 rdgspac 304.800612 rdgwidth 101.600204 dkhit 0.0 dkspac 0.0 P 011 asdf 2.4 crif -2.0 P 012 soilos 0.85 P 013 laymix 0.5 P 040 P 034 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 002 gbioarea 1.0 P 024 fbioflagvt 0 massflatvt1 0.7 massflatvt2 .55 massflatvt3 .5 massflatvt4 0.1 massflatvt5 1.0 P 025 burydist 4 massburyvt1 .25 massburyvt2 .2 massburyvt3 .15 massburyvt4 .13 massburyvt5 .19 P 026 massresurvt1 0.05 massresurvt2 .05 massresurvt3 0.05 massresurvt4 0.1 massresurvt5 0.05