Fert. applic. anhyd knife 15 inch spacing high disturb O 003 oenergyarea 8.418531 ostir 35.1 ofuel ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Fertilizer application, moderate disturbance, anhydrous shank type, 15 inch spacing. op_devnotes3 Cloned from ARS, added RUSLE values MAS 5/9/07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS LMOD and WEPS update correlation; new WEPS operation record, named as previous translation 160410 jkp G 001 gtdepth 101.600204 gtilint 0.8 gtilArea 0.5 gtstddepth 101.600204 gtmindepth 76.20015 gtmaxdepth 152.4003 P 001 P 002 rroughflag 1 rrough 15.240031 P 005 rdgflag 1 rdghit 50.800102 rdgspac 304.8006 rdgwidth 25.400051 dkhit 0.0 dkspac 0.0 P 011 asdf 2.4 crif 2.0 P 012 soilos 0.85 P 013 laymix 0.15 P 040 P 034 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 002 gbioarea 1.0 P 024 fbioflagvt 0 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.4 massflatvt5 1 P 025 burydist 1 massburyvt1 0.25 massburyvt2 0.2 massburyvt3 .15 massburyvt4 .13 massburyvt5 0.19 P 026 massresurvt1 0.06 massresurvt2 0.06 massresurvt3 0.06 massresurvt4 0.1 massresurvt5 0.06