Drip tape injection shank O 003 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Drip tape installation operation, shank, drip tape injection and normally covering disks oenergyarea 7.4831395 ostir 2.6 ofuel op_devnotes3 Drip tape injection shank. 030503 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/8/07 MAS Cloned and adjusted the values 11-27-07 LMOD and WEPS DB correlation, existing WEPS operation record, 160410 jp G 001 gtdepth 101.600204 gtilint .6 gtilArea .2 gtstddepth 101.600204 gtmindepth 76.20015 gtmaxdepth 152.4003 P 001 P 002 rroughflag 1 rrough 15.240031 P 011 asdf 3.0 crif -0.22 P 012 soilos 0.75 P 013 laymix 0.05 P 034 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 002 gbioarea 1.0 P 024 fbioflagvt 0 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.3 massflatvt5 1.00 P 025 burydist 1 massburyvt1 0.1 massburyvt2 0.08 massburyvt3 .06 massburyvt4 .052 massburyvt5 0.076 P 026 massresurvt1 0.02 massresurvt2 0.02 massresurvt3 0.02 massresurvt4 0.02 massresurvt5 0.02