Fert applic. shank low disturbance, 15 in spacing O 003 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Minimum disturbance fertilizer injector shank implement, 15 inch spacing. oenergyarea 8.418531 ostir 2.6 op_devnotes3 Minimum disturbance fertilizer injector shank.on 15 inch spacing. Each injector typically has depth guage wheels that control the amount of disturbance and lateral soil splash. About 3 inch wide disturbed area per shank. 122106 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS Created 12-11-07 MAS LMOD and WEPS update correlation; existing WEPS operation record 160410 jkp G 001 gtdepth 101.600204 gtilint 0.8 gtilArea 0.25 gtstddepth 101.600204 gtmindepth 76.20015 gtmaxdepth 152.4003 P 001 P 002 rroughflag 1 rrough 15.240031 P 005 rdgflag 1 rdghit 50.800102 rdgspac 381.00076 rdgwidth 254.0005 dkhit 0.0 dkspac 0.0 P 011 asdf 2.4 crif 2.0 P 012 soilos 0.7 P 013 laymix 0.2 P 040 P 034 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 002 gbioarea 1.0 P 024 fbioflagvt 0 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.4 massflatvt5 1.0 P 025 burydist 1 massburyvt1 0.17 massburyvt2 .13 massburyvt3 .099 massburyvt4 0.086 massburyvt5 0.14 P 026 massresurvt1 0.04 massresurvt2 0.04 massresurvt3 0.04 massresurvt4 0.06 massresurvt5 0.06