Furrow diker O 003 ospeed 1.7881091 odirect 0.0 ostdspeed 1.7881091 ominspeed 1.3410819 omaxspeed 3.5762181 op_notes3 Furrow Diker creates dams in furrows between lister ridges or beds. oenergyarea 3.2738733 ostir 7.28 ofuel op_devnotes3 Furrow Diker creates dams in furrows between lister ridges or beds. 11/08/01 DTL Cloned Bedder, hipper, hiller and edited. MAS 5/9/07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS LMOD and WEPS update correlation; existing WEPS operation record, 160410 jkp G 001 gtdepth 101.600204 gtilint .5 gtilArea .35 gtstddepth 101.600204 gtmindepth 76.20015 gtmaxdepth 177.80035 P 001 P 002 rroughflag 1 rrough 20.320042 P 011 asdf 3.0 crif 2.0 P 012 soilos 0.75 P 013 laymix 0.75 P 005 rdgflag 1 rdghit 203.20041 rdgspac 760.0 rdgwidth 381.00076 dkhit 177.80035 dkspac 1219.2024 P 034 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 002 gbioarea 1.0 P 024 fbioflagvt 0 massflatvt1 0.6 massflatvt2 0.5 massflatvt3 0.3 massflatvt4 0.1 massflatvt5 1.00 P 025 burydist 1 massburyvt1 0.18 massburyvt2 0.14 massburyvt3 0.11 massburyvt4 0.091 massburyvt5 0.13 P 026 massresurvt1 0.04 massresurvt2 0.04 massresurvt3 0.04 massresurvt4 0.06 massresurvt5 0.04