Sand fighter on beds O 003 ospeed 2.6821637 odirect 0.0 ostdspeed 2.6821637 ominspeed 1.3410819 omaxspeed 3.129191 op_notes3 Row cultivation, used between beds general use, weed and wind erosion control, similar to a rotary hoe except spade points are further apart and not pointed. oenergyarea 4.1157265 ostir 19.89 ofuel op_devnotes3 This is a clone from Sand Fighter. This is used between the beds to roughen the surface. This is a row crop tool. The ridge roughness is maintained from the prevous tillage. Sandfighter makes roughened surface with spade points mounted on spiderwheels mounted on a shaft. Similar to a rotary hoe except spade points are further apart and not pointed. Also similar to a mulch treader but not as agressive and not operated on a skew. 04-01-02 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. Burial rates are changed to match a rotary hoe and the area effected is reduced to 50% because of the area not touched by the tool. 7-27-10 MAS LMOD and WEPS update correlation; existing WEPS operation record, 160410 jkp G 001 gtdepth 76.20015 gtilint 0.5 gtilArea 0.50 gtstddepth 76.20015 gtmindepth 25.400051 gtmaxdepth 101.600204 P 001 P 002 rroughflag 1 rrough 10.160021 P 005 rdgflag 0 rdghit 25.4000508001016 rdgspac 152.4003048006096 rdgwidth 0 dkhit 0 dkspac 0 P 011 asdf 3.0 crif -0.22 P 012 soilos 0.7 P 013 laymix 0.5 P 034 frselpool 3 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.8 threshmultvt2 0.85 threshmultvt3 0.9 threshmultvt4 0.95 threshmultvt5 1.0 G 002 gbioarea 1.0 P 024 fbioflagvt 14 massflatvt1 0.25 massflatvt2 0.2 massflatvt3 0.25 massflatvt4 0.1 massflatvt5 1.0 P 025 burydist 1 massburyvt1 0.2 massburyvt2 0.2 massburyvt3 0.15 massburyvt4 0.15 massburyvt5 0.323 P 026 massresurvt1 0.05 massresurvt2 0.05 massresurvt3 0.05 massresurvt4 0.07 massresurvt5 0.05