Subsoiler O 003 ospeed 2.0116227 odirect 0.0 ostdspeed 2.0116227 ominspeed 1.3410819 omaxspeed 2.2351363 op_notes3 Tillage operation, Subsoiler or Vee ripper. Shanks are not in-line but mounted on a heavy vee angled toolbar. Vegetation is killed. oenergyarea 19.64324 ostir 32.91 ofuel op_devnotes3 Subsoiler or Vee ripper. Shanks are not in-line but mounted on a heavy vee angled toolbar. rev 012507 DTL G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/8/07 MAS LMOD and WEPS update correlation; existing WEPS operation record, 160410 jkp G 001 gtdepth 381.00076 gtilint 0.8 gtilArea 0.75 gtstddepth 381.00076 gtmindepth 304.8006 gtmaxdepth 457.2009 P 001 P 002 rroughflag 1 rrough 30.480062 P 005 rdgflag 1 rdghit 101.600204 rdgspac 914.40186 rdgwidth 0.0 dkhit 0.0 dkspac 0.0 P 011 asdf 2.4 crif -2.0 P 012 soilos 0.8 P 013 laymix 0.25 P 034 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 002 gbioarea 1.0 P 024 fbioflagvt 0 massflatvt1 0.6 massflatvt2 0.5 massflatvt3 0.45 massflatvt4 0.4 massflatvt5 1.0 P 025 burydist 4 massburyvt1 .304 massburyvt2 0.268 massburyvt3 0.232 massburyvt4 .172 massburyvt5 .34 P 026 massresurvt1 0.01 massresurvt2 0.01 massresurvt3 0.01 massresurvt4 0.1 massresurvt5 0.01