Furrow diker O 03 ospeed 1.7881091 odirect 0.0 ostdspeed 1.7881091 ominspeed 1.3410819 omaxspeed 3.5762181 op_notes3 Furrow Diker creates dams in furrows between lister ridges or beds. oenergyarea 3.2738733 ostir 7.28 ofuel op_devnotes3 Furrow Diker creates dams in furrows between lister ridges or beds. 11/08/01 DTL Cloned Bedder, hipper, hiller and edited. MAS 5/9/07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS LMOD and WEPS update correlation; existing WEPS operation record, 160410 jkp G 01 gtdepth 101.600204 gtilint .5 gtilArea .35 gtstddepth 101.600204 gtmindepth 76.20015 gtmaxdepth 177.80035 P 01 P 02 rroughflag 1 rrough 20.320042 P 11 asdf 3.0 crif 2.0 P 12 soilos 0.75 P 13 laymix 0.75 P 05 rdgflag 1 rdghit 203.20041 rdgspac 760.0 rdgwidth 381.00076 dkhit 177.80035 dkspac 1219.2024 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.6 massflatvt2 0.5 massflatvt3 0.3 massflatvt4 0.1 massflatvt5 1.00 P 25 burydist 1 massburyvt1 0.18 massburyvt2 0.14 massburyvt3 0.11 massburyvt4 0.091 massburyvt5 0.13 P 26 massresurvt1 0.04 massresurvt2 0.04 massresurvt3 0.04 massresurvt4 0.06 massresurvt5 0.04