Fert. applic. anhyd knife 15 inch spacing high disturb O 03 oenergyarea 8.418531 ostir 35.1 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Fertilizer application, moderate disturbance, anhydrous shank type, 15 inch spacing. op_devnotes3 Cloned from ARS, added RUSLE values MAS 5/9/07 G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/7/07 MAS LMOD and WEPS update correlation; new WEPS operation record, named as previous translation 160410 jkp Increased soil surface area disturbed to 90% to match WEPP and R2 and increased P25 to better match WEPP and RUSLE2. Values were set lower than RUSLE2 and should be equal to or higher since WEPS adjusts for disturbed soil surface. MJK 5-17-2021 ofuel G 01 gtdepth 152.4003 gtilint 0.6 gtilArea 0.9 gtstddepth 152.4003 gtmindepth 101.600204 gtmaxdepth 203.20041 P 01 P 02 rroughflag 1 rrough 15.240031 P 05 rdgflag 1 rdghit 50.800102 rdgspac 381.00076 rdgwidth 25.400051 dkhit 0.0 dkspac 0.0 P 11 asdf 2.4 crif 2.0 P 12 soilos 0.85 P 13 laymix 0.15 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.4 massflatvt5 1.0 P 25 burydist 4 massburyvt1 0.45 massburyvt2 0.35 massburyvt3 0.25 massburyvt4 0.25 massburyvt5 0.50 P 26 massresurvt1 0.06 massresurvt2 0.06 massresurvt3 0.06 massresurvt4 0.1 massresurvt5 0.06