Drip tape injection shank on beds O 03 ospeed 2.2351363 odirect 0.0 ostdspeed 2.2351363 ominspeed 1.5645955 omaxspeed 2.9056773 op_notes3 Drip tape installation operation, shank, drip tape injection and normally covering disks in preformed beds. oenergyarea 7.4831395 ostir 2.6 op_devnotes3 RUSLE Notes: Bed operation on existing beds. May include drip tape installation. 10/28/01 DTL Cloned 11-27-07 MAS G2 was added into file in front of the flattening (P24), burial (P25), and resurfacing (P26) factors because the area affected is less than 1.0 and the RUSLE values were normalized to 1.0. This change will imulate the correct residue changes based on the method set forth in RUSLE. RUSLE's factors have been redused to based on the area affected. The stalk fall rate factor (P34) was moved ahead of the new (G2) factor to set the fall rate to the less than 1.0 area affected. 8/8/07 MAS LMOD and WEPS DB correlation, existing WEPS operation record, 160410 jp ofuel G 01 gtdepth 101.600204 gtilint 0.6 gtilArea 0.20 gtstddepth 101.600204 gtmindepth 76.20015 gtmaxdepth 152.4003 P 01 P 02 rroughflag 1 rrough 15.240031 P 11 asdf 3.0 crif -0.22 P 12 soilos 0.75 P 13 laymix 0.05 P 34 frselpool 7 ratemultvt1 3.0 ratemultvt2 2.5 ratemultvt3 2.0 ratemultvt4 1.5 ratemultvt5 1.0 threshmultvt1 0.5 threshmultvt2 0.6 threshmultvt3 0.7 threshmultvt4 0.8 threshmultvt5 1.0 G 02 gbioarea 1.0 P 24 fbioflagvt 0 massflatvt1 0.5 massflatvt2 0.45 massflatvt3 0.4 massflatvt4 0.3 massflatvt5 1.00 P 25 burydist 1 massburyvt1 0.95 massburyvt2 0.92 massburyvt3 0.85 massburyvt4 0.5 massburyvt5 0.6 P 26 massresurvt1 0.02 massresurvt2 0.02 massresurvt3 0.02 massresurvt4 0.02 massresurvt5 0.02