\documentclass[10pt,letterpaper, final]{report} % \documentclass{} required in all files

\usepackage{../preamble/myWEPS} % This is now our single preamble file inclusion (it assumes a “.sty” file extension)

\begin{document}

One can view erosion results from multiple WEPS Runs simultaneously from the WEPS Multiple Run Manager (WMRM)
shown in (\cref{fig:WEPS_Multiple_Run_Manager}).
It is accessible from the Main WEPS window (\cref{fig:WEPS_main_screen})
by selecting the Multiple Run Manager option under the \textbf{ViewOutput} menu.
WMRM provides a tabular display format intended to allow quick comparisons of selected WEPS Runs.
A common anticipated usage is to make a baseline or existing management scenario WEPS Run
and then additional WEPS simulation runs using variations on that management scenario,
or completely different management scenarios.
WMRM can then be used to quickly compare/assess the different sets of practices on erosion control,
Soil Conditioning Index values, crop water usage, etc.

The WMRM window is user configurable, with the desired columns displayed selectable for specific reporting
and analysis purposes. In fact, multiple WMRM windows can be displayed, each configured independently of each other.
By default, all the WEPS Runs for the current Project are displayed.
However, the user can \textit{hide} WEPS Runs not wanted in the display and select additional Runs from other folder, Projects, etc.
One can click on the mouse button with the mouse pointer in any data cell for a selected WEPS Run
and the full Report that data came will then be displayed.
The user can even select the WEPS Run under the "Run Name" column heading and \textit{Reload} that WEPS Run's inputs
into the WEPS interface so that those inputs can be modified/edited for another WEPS simulation run.

WMRM windows consists of the following major components:

\begin{itemize}
\item[]{Menu bar - \scalerel*{\includegraphics{images/WMRM/WMRM_Menu_Bar.jpg}}{\strut}}

\item[]{Left window pane for selecting WEPS Runs from various folders - \vcenteredinclude{images/WMRM/WMRM_left_window_pane.jpg}}
\item[]{WMRM table heading - \vcenteredinclude{images/WMRM/WMRM_table_heading.jpg}}
\item[]{WMRM table view - Consists of a table of columns displaying selected Run output data.
The columns displayed can be selected or de-selected via the \textbf{View} menu options.
The default columns are shown here:
\begin{figure}[H]
\centering
	\includegraphics[scale=2.0]{images/WMRM/WMRM_table_view.jpg}
\end{figure}
}
\end{itemize}

The WMRM table consists of the following columns by default (columns can be selectively displayed or hidden)
as shown in (\cref{fig:WEPS_Multiple_Run_Manager}).

\begin{itemize}
\item[]{\textbf{Run Name} - The WEPS Run name.
No path included in this column cell entry.
The \textbf{Run Location} column, which can be optionally specified, provides the path to the WEPS Run.}

\item[]{\textbf{Management Name} - The name of the management/crop rotation file used in the WEPS Run.}

\item[]{\textbf{SCI} - The Soil Conditioning Index for the WEPS Run.}
\item[]{\textbf{Energy} - The Rotation Energy value for the WEPS Run.}
\item[]{\textbf{STIR} - The STIR value for the WEPS Run.}


\item[]{\textbf{Gross} - The gross annual soil loss on the field.}

\item[]{\textbf{Net Total} - The annual net soil loss leaving the field.}

\item[]{\textbf{Net Creep/Salt} - The annual net creep and saltation size particles leaving the field.}

\item[]{\textbf{Net Suspension} - The annual net suspension size particles leaving the field.}

\item[]{\textbf{PM10} - The annual net PM10 ($<$10µ) particles leaving the field.}
\end{itemize}

\begin{figure}[H]
\centering
	\includegraphics[scale=1.63]{images/WMRM/WMRM_1.jpg}
\caption{WEPS Multiple Run Manager (WMRM).}
\label{fig:WEPS_Multiple_Run_Manager}
\end{figure}

The \textbf{\textul{Runs}} menu consists of: 
\begin{itemize}

\item[]{\textbf{Add Directory} - Add a directory containing WEPS Runs for display in WMRM.}

\item[]{\textbf{Add Single Run} - Add a single WEPS Run for display in WMRM.}

\item[]{\textbf{Restore Selected Run in WEPS} - Restore the selected WEPS Run inputs into the main 
WEPS interface screen.}

\item[]{\textbf{Export Selected Run...} - Export the selected WEPS Run into the user specified directory 
location in a popup window. The user has the option of deleting the original copy (folder and contents)
if desired from within that window.}

\item[]{\textbf{Delete Selected Run} - Delete the selected WEPS Run.
Note that this truly deletes the selected WEPS Run's folder and contents.
Therefore, one cannot retrieve that WEPS Run's contents after deletion.}

\item[]{\textbf{Re-display Run(s)} - Re-display previously hidden WEPS Run(s).
A choice list of previously hidden WEPS Runs will be displayed for selection and re-display.}

\item[]{\textbf{Hide Run in Tabular Display} - Hide selected WEPS Run within the WMRM table
from displaying in a table row within WMRM.}

\item[]{\textbf{Refresh Table} - 
Refresh the WMRM table so that it contains all the WEPS Runs in the specified locations.
Useful if the WMRM window is open and additional WEPS Runs have been made since opening it
that may be desired to be displayed within the existing open WMRM window.
Note that if the user does not want all the new WEPS Runs from being included in the WMRM window,
they can select the individual new WEPS Runs desired via the \textbf{Add Single Run} menu option.}

\item[]{\textbf{Close} - Close the WMRM window.}

\item[]{\textbf{New WMRM Window} - Open a new WMRM window.}

\end{itemize}

The \textbf{\textul{View}} menu consists of the following data options.
If the adjacent box is checkmarked, the column is displayed in the WMRM table.
If the adjacent box is not checked, the column will not display in the WMRM table.

\begin{itemize}

%% No longer available? - LEW
%%\item[]{\textbf{Default} - Resets the WMRM table to the default list of columns (currently all of them).}

\item[]{\textbf{Select All} - Selects all available data columns.}

\item[]{\textbf{Run Location} - Selects the WEPS Run location name column to be displayed.
If the Run location path is too long to fit on one line within the current cell width,
the path will be wrapped onto multiple lines within the cell to allow the user to see the full path.}
\item[]{\textbf{Run Name} - Selects the WEPS Run name column to be displayed.
If the Run name is too long to fit on one line within the current cell width,
the Run name will be wrapped onto multiple lines within the cell to allow the user to see the full Run name.}
\item[]{\textbf{Soil Name} - Selects the WEPS Run Soil name column to be displayed.
If the Soil name is too long to fit on one line within the current cell width,
the Soil name will be wrapped onto multiple lines within the cell to allow the user to see the full name.}
\item[]{\textbf{Management Name} - Selects the WEPS Run Management name column to be displayed.
If the Management name is too long to fit on one line within the current cell width,
the Management name will be wrapped onto multiple lines within the cell to allow the user to see the full name.}

\item[]{\textbf{Client Name} - Selects the WEPS Run Client Name column to be displayed.
If the client's name is too long to fit on one line within the current cell width,
the name will be wrapped onto multiple lines within the cell to allow the user to see the full client name.}
\item[]{\textbf{Farm No} - Selects the WEPS Run Farm No. column to be displayed.}
\item[]{\textbf{Tract No} - Selects the WEPS Run Tract No. column to be displayed.}
\item[]{\textbf{Field No} - Selects the WEPS Run Field No. column to be displayed.}

\item[]{\textbf{Field Size} - Selects the WEPS Run Field Size column to be displayed.}

\item[]{\textbf{SCI} - Selects the WEPS Run Soil Conditioning Index column to be displayed.}
\item[]{\textbf{Energy} - Selects the WEPS Run Rotation Energy value column to be displayed.}
\item[]{\textbf{STIR} - Selects the WEPS Run STIR column to be displayed.}
\item[]{\textbf{OM} - Selects the WEPS Run Soil Conditioning Index OM subfactor column to be displayed.}
\item[]{\textbf{ER} - Selects the WEPS Run Soil Conditioning Index ER subfactor column to be displayed.}
\item[]{\textbf{FO} - Selects the WEPS Run Soil Conditioning Index FO subfactor column to be displayed.}

\item[]{\textbf{Precip} - Selects the WEPS Run Precipitation column to be displayed.}
\item[]{\textbf{Irrig} - Selects the WEPS Run Irrigation column to be displayed.}
\item[]{\textbf{Runoff} - Selects the WEPS Run Runoff column to be displayed.}
\item[]{\textbf{Drainage} - Selects the WEPS Run Drainage column to be displayed.}

\item[]{\textbf{Gross} - Selects the average annual Gross soil loss column to be displayed.}
\item[]{\textbf{Net Total} - Selects the average annual Net Total soil loss column to be displayed.}
\item[]{\textbf{Creep/Salt} - Selects the average annual Net Creep/Salt column to be displayed.}
\item[]{\textbf{Suspension} - Selects the average annual Net Suspension column to be displayed.}
\item[]{\textbf{PM10} - - Selects the average annual Net PM10 ($<$10µ particle size) column to be displayed.}

\end{itemize}

The \textbf{\textul{Reports}} menu consists of: 
\begin{itemize}
\item[]{\textbf{WEPS Basic Run Metrics Summary} - Displays the basic WEPS Run information in the WMRM table.}
\item[]{\textbf{WEPS Erosion Metrics Summary} - Displays the WEPS Erosion information in the WMRM table.}
\item[]{\textbf{WEPS Soil Condition Index Metrics Summary} - Displays the SCI and its subfactor information in the WMRM table.}
\item[]{\textbf{WEPS Water Use Metrics Summary} - Displays the water usage information in the WMRM table.}
\item[]{\textbf{WEPS Expanded Metrics Summary} - Displays expanded WEPS Run information in the WMRM table.}
\end{itemize}

The \textbf{\textul{Header}} menu consists of: 
\begin{itemize}
\item[]{\textbf{Edit} - Displays a pop up window where the user can edit the individual header fields as desired.
The default header field values are obtained from the first WEPS Run displayed in the table.
This allows the user to override the default heading info for hard copy printouts, etc.
Here is an example display of the pop up window allowing editing of the individual WMRM header fields.
\begin{figure}[H]
\centering
	\includegraphics[scale=2.0]{images/WMRM/WMRM_Header_Fields_selection.jpg}
\end{figure}
}
\end{itemize}

The \textbf{\textul{Print}} menu consists of: 
\begin{itemize}
\item[]{\textbf{Print...} - Print the contents of the WMRM table.
The default page format is "Letter" (8 1/2" by 11") in landscape mode.
Other printing options, margin settings and mode (Portrait) are available for selection under the \textbf{Page Format} menu button.
Here is an example display of the "Print Preview" window.
\begin{figure}[H]
\centering
	\includegraphics[scale=2.0]{images/WMRM/WMRM_Print_Preview.jpg}
\end{figure}
}
\end{itemize}

The \textbf{\textul{Help}} menu consists of:

\begin{itemize}

\item[]{\textbf{About WMRM} - Displays a pop-up window that provides information about the WMRM and WEPS in general.} 

\end{itemize}

The left side of the screen consists of a tree of directories that contain WEPS Runs that can be selected for display.
A subset of the total available runs can be selected by clicking on the desired WEPS Runs to display.
Use Ctrl-right mouse button to select multiple, non-contiguous WEPS Runs for display.

\end{document}

