%%My WEPS documentation macros

% Simple substitution macro for easily updating WEPS version number in document
\newcommand{\WEPSver}[0]{WEPS 1.6}
%\newcommand{\WEPSver}{WEPS 1.6}

\newcommand{\ARScontactName}{Larry Wagner}
\newcommand{\ARScontactaddress}{
\begin{itemize}[noitemsep, leftmargin=*]
\item[]{\ARScontactName{}}
\item[]{WEPS Project Leader}
item[]{USDA-ARS Rangeland Resources \& Systems Research Unit}
\item[]{2150 Centre Ave., Bldg. D Suite 200}
\item[]{Fort Collins, CO 80526}
\end{itemize}
}
\newcommand{\ARScontactinfo}{
\begin{itemize}[noitemsep, leftmargin=*]
\item[]{Phone:	 970-492-7322}
\item[]{E-mail:	 \href{mailto:weps@ars.usda.gov}{weps@ars.usda.gov}}
\item[]{WebStart WEPS URL:	 \href{https://infosys.ars.usda.gov/wepstart}{https://infosys.ars.usda.gov/wepstart}}
\item[]{ARS Wind Erosion URL:	 \href{https://infosys.ars.usda.gov/WindErosion}{https://infosys.ars.usda.gov/WindErosion}}
\end{itemize}
}

\newcommand{\WEPScontact}{\ARScontact{}}
\newcommand{\WEPScontactaddress}{
\begin{itemize}[noitemsep, leftmargin=*]
\item[]{WEPS}
\item[]{USDA-ARS Rangeland Resources \& Systems Research Unit}
\item[]{2150 Centre Ave., Bldg. D Suite 200}
\item[]{Fort Collins, CO 80526}
\end{itemize}
}
\newcommand{\WEPScontactinfo}{\ARScontactinfo{}}

\newcommand{\NRCScontactName}{Chris Coriel}
\newcommand{\NRCScontactaddress}{
\begin{itemize}[noitemsep, leftmargin=*]
\item[]{\NRCScontactName{}}
\item[]{NRCS National Erosion Specialist}
\item[]{501 W. Felix St., FWFC, Bldg. 23}
\item[]{Fort Worth, TX 76115}
\end{itemize}
}
\newcommand{\NRCScontactinfo}{
\begin{itemize}[noitemsep, leftmargin=*]
\item[]{Phone: 817-509-3213}
\item[]{Cell 817-471-0122}
\item[]{Fax: 817-509-3337}
\item[]{E-mail:	 \href{mailto:chris.coreil@usda.gov}{chris.coreil@usda.gov}}
\item[]{NRCS Wind Erosion URL:	\href{https://www.nrcs.usda.gov/resources/tech-tools/wind-erosion-prediction-system}{https://www.nrcs.usda.gov/resources/tech-tools/wind-erosion-prediction-system}}
\end{itemize}
}

% Simple macros for Chapter/Section/Subsection names
\providecommand{\FooterBLtxt}{WEPS User Guide}		%% Default bottom left footer text
\newcommand{\Pref}{Preface}
\newcommand{\Ack}{Acknowledgements}
\newcommand{\WEPSIntro}{Introduction}
\newcommand{\NewFeatures}{WebStart WEPS New Features}
\newcommand{\HowtoDoc}{How to use this Document}
\newcommand{\CompReq}{Computer Requirements}
\newcommand{\WEPSInstall}{WebStart WEPS Installation}
	\newcommand{\WEPSNRCSInstall}{WebStart WEPS Quick Install (NRCS/TSP Users)}
	\newcommand{\WEPSARSInstall}{WebStart WEPS Quick Install (Public/Researcher/International Users)}
\newcommand{\WebStartInstall}{Java WebStart Install}
\newcommand{\DeskShortcut}{Manual Creation of Desktop Shortcut for WebStart WEPS}
\newcommand{\MenuShortcut}{Manual Creation of Menu Entry for WebStart WEPS}
\newcommand{\BootInstall}{WEPS Bootloader Install (Windows only)}
\newcommand{\OpenWebStartInstall}{Java OpenWebStart Install}
\newcommand{\MSIInstall}{Windows MSI Install}
\newcommand{\WEPSWizard}{Running the WEPS Welcome Wizard}
\newcommand{\WEPSQuickSimulation}{Quick Simulation using WebStart WEPS}
	\newcommand{\WEPSQuickStart}{Quick Start for WebStart WEPS}
\newcommand{\WEPSOverview}{Overview: Wind Erosion Prediction System}
\newcommand{\WEPSInterRef}{WEPS Interface Reference}
\newcommand{\SpecWEPSRunInfo}{Specifying WEPS Run Information}
\newcommand{\ChooseLoc}{Choosing a Location}
\newcommand{\SlctMngmtRot}{Selecting a Management Rotation}
\newcommand{\ChoosingSoil}{Choosing a Soil}
\newcommand{\SlctWindBarrier}{Selecting a Wind Barrier}
\newcommand{\WEPSProjects}{WEPS Projects}
\newcommand{\MakingWEPSRun}{Building and Making a WEPS Run}
\newcommand{\MakingWEPSRunsLocally}{Configuring WEPS for Building and Executing Runs Locally (even without Internet access)}
	\newcommand{\LocalExecutionConfigurationSettings}{Local Execution Configuration Settings}
	\newcommand{\LocalExecutionConsiderationsNoInternet}{Considerations for running WebStart WEPS without internet connectivity}

\newcommand{\WEPSProjectRunFolders}{WEPS Project and Run Folders (and other special WEPS files/folders)}
	\newcommand{\DefinitionsofWEPSProjectsRuns}{Definitions of WEPS Projects and WEPS Runs}
	\newcommand{\WorkingwithWEPSProjects}{Working with WEPS Projects}
		\newcommand{\SuggestedLocationsforWEPSProjects}{Suggested Locations for WEPS Projects}
		\newcommand{\SuggestedNamingConventionsforWEPSProjects}{Suggested Naming Conventions for WEPS Projects}
		\newcommand{\CreatingnewWEPSProjects}{Creating new WEPS Projects}
		\newcommand{\SwitchingWEPSProjects}{Switching WEPS Projects}
	\newcommand{\WorkingwithWEPSRuns}{Working with WEPS Runs}
		\newcommand{\SuggestedLocationsforWEPSRuns}{Suggested Locations for WEPS Runs}
		\newcommand{\SuggestedNamingConventionsforWEPSRuns}{Suggested Naming Conventions for WEPS Runs}
		\newcommand{\CreatingnewWEPSRuns}{Creating new WEPS Runs}
		\newcommand{\ReloadingPreviousWEPSRuns}{Re-loading Previous WEPS Run contents into the WEPS Interface}

\newcommand{\WEPSFileChoosers}{WEPS FileChoosers (Features and Functionality)}
	\newcommand{\WEPSFileChooserElements}{WEPS FileChooser Elements}
	\newcommand{\WEPSFileChooserFeatures}{WEPS FileChooser Features}
		\newcommand{\WEPSFileChooserSelectionMethods}{WEPS FileChooser Selection Methods}
		\newcommand{\WEPSFileChooserPathShortcuts}{WEPS FileChooser Path Traversing and Shortcut Buttons}
		\newcommand{\WEPSFileChooserActionOptions}{WEPS FileChooser Action Options}
		
		
\newcommand{\ViewingWEPSOutputReports}{Viewing WEPS Output Reports} 
	\newcommand{\RunSummaryReport}{Run Summary Report}
	\newcommand{\MngmtRotSummReport}{Management Rotation Summary Report}
	\newcommand{\CropReports}{Crop Reports}
	\newcommand{\CoverCropReports}{Cover Crop Reports}
	\newcommand{\CropIntervalReports}{Crop Interval Reports} 
	\newcommand{\STIREnergyReport}{STIR Energy Report}
	\newcommand{\ConfIntReport}{Confidence Interval Report}
	\newcommand{\ViewPrevReport}{Viewing Previous WEPS Output Reports}
	\newcommand{\ViewSciReports}{Viewing Science Model Reports} 
	\newcommand{\ViewTabDetReports}{Viewing Tabular Detail Reports}
	\newcommand{\ReportErrQuesComments}{Reporting Errors and Submitting Questions/Comments}
	\newcommand{\EditMngmtCropRot}{Editing with the Management/Crop Rotation Editor for WEPS (MCREW)}
\newcommand{\UsingMCREW}{Using MCREW}
	\newcommand{\OpenSaveMCREW}{Opening and Saving MCREW files}
	\newcommand{\MCREWMenuBar}{MCREW Menu Bar Functions}
	\newcommand{\MCREWButtonBarFunctions}{MCREW Button Bar Functions}
	\newcommand{\MCREWTableViewEditing}{MCREW Table View Editing} 
	\newcommand{\MCREWGeneralEditing}{MCREW General Editing Functions within the Column Menus}
	\newcommand{\MCREWOperationColumnEditing}{MCREW Operation Column Editing Functions}
	\newcommand{\MCREWOperationCropDialogScreens}{MCREW Operation and Crop Dialog Drill-Down Screens}
\newcommand{\ViewingEditingSoilRecord}{Viewing and Editing a Soil Record} 
	\newcommand{\SoilMenuBarFunctions}{Soil Menu Bar Functions} 
	\newcommand{\SoilButtonBarFunctions}{Soil Button Bar Functions}
\newcommand{\DownloadingSoilData}{Downloading Soil Data}
\newcommand{\WEPSMultipleRunManager}{WEPS Multiple Run Manager (WMRM)}
\newcommand{\DisplayingWindStationDataInformation}{Displaying Wind Station Data Information} 
\newcommand{\ComparingWEPSFilesforDifferences}{Comparing WEPS Files for Differences}
\newcommand{\WEPSConfigurationOptionsandSettings}{WEPS Configuration Options and Settings} 

\newcommand{\UsingWEPSInConservationPlanning}{Using WEPS In Conservation Planning}
	\newcommand{\InterpretingOutputs}{Interpreting Outputs}
	\newcommand{\TabularDetailReport}{Tabular Detail Report}
	\newcommand{\SpecialFieldConfigurations}{Special Field Configurations}
	\newcommand{\UsingBarriersforErosionControlinWEPS}{Using Barriers for Erosion Control in WEPS}
	\newcommand{\EvaluatingWindErosionProblems}{Evaluating Wind Erosion Problems with WEPS}

\newcommand{\ExampleExercises}{Example Exercises} 
\newcommand{\ExercisetwoScenario}{Exercise 2 - Adding a Crop Rotation}
\newcommand{\ExercisethreeScenario}{Exercise 3 – Adding a forage crop and grazing into a rotation} 
\newcommand{\ExercisefourScenario}{Exercise 4 – Adding Irrigation}
\newcommand{\ExercisefiveScenario}{Exercise 5 – Alfalfa Hay, Editing, and More Irrigation}
\newcommand{\ExercisesixScenario}{Exercise 6 – Tomatoes, Rye Cover Crop, and Plastic Mulch}
\newcommand{\ExercisesevenScenario}{Exercise 7 – Irrigated Corn Silage, Adding Manure and a Winter Forage Crop}
\newcommand{\ExerciseeightScenario}{Exercise 8 – Critical Dominant Soil}
\newcommand{\ExercisenineScenario}{Exercise 9 – Selecting Correct Simulation Region Shape and Size}
\newcommand{\FlagandCommandLineOptions}{Flag and Command Line Options}

\newcommand{\ScienceOverview}{Science Overview}
\newcommand{\WEPSHowToGuide}{WEPS How To Guide}
\newcommand{\WEPSHTGuidetwo}{Crop Database Record Development}  
\newcommand{\WEPSHTGuidethree}{Management Operation Database Record Development} 
\newcommand{\WEPSWithMeasuredData}{Using WEPS with Measured Data}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
%\newcommand{\}{}
